@ANY2400-SC3 Modules

A sophisticated IEEE 802.15.4 wireless networking module for worldwide 2.4 GHz ISM band provides exceptional transmission characteristics utilizing innovative RF technologies with the added benefit of antenna diversity. Despite packing an impressive feature set, an ultra-compact module offers low power consumption suited for advanced applications.

Mechanical module size 40 x 13.5 x 3 mm

@ANY2400-SC3 modules are fully integrated solutions that contain all of the digital and analog circuitry, required for easily establishing reliable wireless connectivity. Utilizing the robust and popular Microchip/Atmel platform, optimal RF characteristics are achieved via state-of-the-art antenna diversity mechanisms. An on-chip ceramic antenna, a U.FL connector (@ANY2400-SC3-1) or two U.FL connectors (@ANY2400-SC3-2) are perfectly geared for optimum performance. In addition, a special low noise amplifier front-end module fires up the transmitters output power to 18 dBm, so that even minimal incoming signal strengths of -121 dBm become receivable.

Ensure the quick setup by ordering the product preprogrammed with either our AT-command-based Smart MAC Suite firmware, your own firmware, or common stacks such as 6LoWPAN, Zigbee PRO or Lightweight Mesh.

Thanks to @ANY modules’ impressive feature set, creating ambitious wireless IoT designs becomes a breeze.


Key Features

  • Full compliance to IEEE 802.15.4-2006, Zigbee PRO and more
  • Outdoor range (line of sight): ≥ 2.5 km
  • Outstanding receiver sensitivity (-121 dBm) and transmitter output power (up to +18 dBm)
  • For international ISM band at 2.4 GHz
  • Network topology: P2P, P2MP, Star, Tree, Mesh (IEEE802.15.4 and Zigbee PRO)
  • Other IEEE 802.15.4 based stacks applicable
  • Smart MAC Suite is provided for easy prototyping and quick setup
  • Extra 256 kB on-board DataFlash for storing firmware images, application data and OTAU support
  • Fully matched on-board ceramic chip antenna and U.FL connector (@ANY2400-SC3-1)
    or two U.FL connectors (@ANY2400-SC3-2, 50Ω) for optimal antenna diversity gain
  • Data rate: up to 2 Mbps, e.g. Zigbee: 250 kbps gross


  • Stamp-shaped soldering pattern, visually controllable, high mechanical strengths
  • Full EN300328, FCC CFR Part 15, RoHS and REACH compliance
  • Easy development with ready-to-use AT-command-based Smart MAC Suite firmware, app examples, Development Kits and full technical support
  • Fast prototyping with preprogrammed firmware (SMS or other common stacks especially preconfigured for modules, e.g. Zigbee)
  • Accelerated project bring-up and testing with @ANY2400-SC3 out-of-the-box devices (see @ANY2400-SC3 BRICK, USB Dongle or Development Kit)
  • Best-in-class range and excellent wall penetration for indoor usage
  • Self-contained structure perfected for extremely low energy consumption, ideal for battery operated devices
  • Easy firmware management using off-the-shelf tools and JTAG interface, including ISP, OTAU or serial flashing via bootloader


Block Diagram of @ANY2400-SC3-1 and @ANY2400-SC3-2 IEEE 802.15.4 Wireless Networking IoT Modules for Worldwide 2.4 GHz ISM Band
RF Characteristics
Max. Transceiver Output Power up to 18 dBm for @ ANY2400-SC3
Receiver Sensitivity (per 1%) up to -121 dBm
Data Rate up to 2 Mbps (proprietary), e.g. 250 kbps @ Zigbee
Frequency international 2.4 GHz ISM Band, 16 channels
Data Encryption AES 128 supported
Modulation O-QPSK (IEEE 802.15.4 compliant)
Applicable Network Topologies P2P, P2MP, Tree, Star, Mesh and other IEEE 802.15.4 based topologies
Hardware Characteristics
Operating Temperature Range -40°C to +85°C
Microcontroller & Transceiver ATmega128RFA1 or
On-Chip Flash 128 kB (256 kB*)
On-Board DataFlash 256 kB
On-Chip RAM 16 kB (32 kB*)
On-Chip EEPROM 4 kB (8 kB*)
ADC 4 ADC lines
GPIOs up to 30 configurable GPIOs
IRQs 2 IRQ lines
Interfaces JTAG, SPI, TWI/I2C, UART, 1-Wire
Electrical Characteristics
Voltage 3.0 V up to 3.6 V
Current Consumption at 25°C TX: <85 mA @ EIRPmax
RX: <22 mA
Idle: 5 mA
Sleep: <10 μA
Radio Compliance EN300328, FCC CFR Part 15
Manufacturing RoHS & REACH
Ordering Information
Part Number AT-ANY-2400-SC3-1
Packing Tray and Tape & Reel 13“ (Dry pack)
MOQ 300 pcs. @Trays/ 500 pcs. @ T&R 13“

*customization option on request

Related Products

@ANY2400-SC-3 BRICK board with integrated sensors for easy application development using IEEE 802.15.4 3.4 GHz @ANY2400-SC-3 IoT modules
@ANY2400-SC3 BRICK Boards

Extended development board for easy application development using IEEE 802.15.4 2.4 GHz @ANY2400-SC3 modules.

Be always up to date!

We inform you about current events in the industry, technological innovation, and our product launches.